|
Ürün ayrıntıları:
|
| Kabine malzemesi: | 2.0mm soğuk rulo çelik levha | Yaşam süresi:: | 10 milyondan fazla veya 10 yıl |
|---|---|---|---|
| Operasyon süresi: | 0.3,0.6,0.9,2,4sec | Çalışma ortam sıcaklığı: | -40 ℃ ~ 75 ℃ |
| Anma gerilimi:: | AC100V ~ AC264V, DC24V | Ürün adı: | Yeni Tasarım Servo Motor 24 V DC Yedekleme Güneş Enerjisi Ücretli Bariyer Kapısı Sistemi |
| Vurgulamak: | otomatik bariyer kapı sistemi,güvenlik bariyer kapısı |
||
New Design Servo Motor 24V DC Backup Solar Power Toll Barrier Gate System
Toll Barrier Functions Introduction:
|
1.When Power off, gate automatically open, no clutch design, no human intervention. When power on, gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special requirement, manual operation is required when power off . Operating arm open and close by hand also can be realized by setting up control board DIP switch, which ensure that the system can be used at any time. |
|
2. The use of Single Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable. |
| 3. A variety of input and output modes can be selected, normally open normally closed optional. |
|
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install. |
| 5. Closing speed can be adjusted, 0.9S, 1.3S. |
| 6. Barrier gate up&down signal relay switch output. |
| 7. Barrier gate running state: OK signal output indicating that the gate is working properly. |
| 8. Barrier gate operation abnormal alarm signal output. |
| 9. Traffic light relay switch signal output. |
| 10. External loop detector signal anti-smashing interface, infrared sensor signals anti-smashing interface. |
| 11. Count mode interface. |
|
12. Arm Open priority anti-smashing function, regardless of the current gate in what state, the operator through the triple push button, software or remote control to issue a gate arm up, the gate will give priority to the implementation of the opening action. |
|
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid damage to the vehicle and barrier gate machine. |
| 14. Delay down selection function. |
| 15. high sensitivity arm auto reverse function (intensity can be adjusted) |
| 16. Parking system interface |
|
17.RS485 or RS232 network communication control up&down interface (no need to install communication module) |
| 18. Anti-collision alarm signal interface. |
| 19. Arm direction change is simple. |
| 20. Adjustable speed port (S curve adjustment) |
Technical data:
| arm length: | 2000mm-6000mm |
| opening and closing time: | ≤ 0.6s, 0.9s, 2s, 4s |
| Rated voltage: | AC100V ~ AC264V, DC24V |
| Frequency: | 50Hz ~ 60Hz |
| Motor rated power: | 50W, the maximum power of 100W |
| Working environment temperature: | -40 ℃ ~ 75 ℃ |
| Power: | standby ≤ 8W, run ≤ 100W |
| Dimensions (W * D * H): | 342 * 312 * 959mm |
| Lifetime: | more than 10 million or 10 years |
| MTTR: | <0.5 hours |
| MTBF: | > 5 million times |
| Protection degree: | IP65 |
| Relative humidity: | ≤ 90% |
| Motor no-load speed: | 3000 r / min |
| Remote control distance: | ≤ 100 meters |
| Longest ARM length: | 6 meters |
| Output torque: | 0.86N.M * 140 = 120N.M. |
| running noise: | < 50dB |
| Barrier N.W | 42.6kg |
| Machine core N.W | 22.1kg |
| Surface treatment | Outdoor metal powder, electrostatic spraying |
How to Contact Seller?
Email: keira@wonsunbarrier.com
Whatsapp: +86 185 0748 1610
Skype: zimin1314
High End Servo Motor Barrier Description:
The new gate uses international leading mechanical and electrical integration design, the new arc-shaped sway crank
and connecting rod design, no need to install anti-overshoot device. Mechanical clutch device achieve arm up& down
by manual operation when power off, and also can be self-locking when arm up and down. It is more simple and reliable.
Running in place to form a sight alignment, so called as three-dimensional structure, so that the lever permanently keeps
fast and smooth operation in 90 degrees. No need mechanical shock absorber. Drive input: Adopt DC 24V permanent
magnet synchronous motor (PMSM motor) With such characteristics that self-locking when power on, unlock when power
off. Motor uses rare earth materials, low power consumption, light weight, low temperature rise, large torque, running
normal below 40 degrees of ultra-low temperature environment. Two times more torque than conventional asynchronous
motor, with energy saving features. Transmission output: Using the high precision planetary tooth structure reducer,
convenient for left and right interchange, low noise, high efficiency, output large torque, not block, oil tight. Forced to
lift the arm doesn’t damage the reducer, truly durable, long maintenance-free greatly reduces the user using cost, High,
End-level servo drive control system, 5000-line encoder feedback the data limit algorithm, the precision limit is exact in
every particular, advanced constant torque intelligent follow-up algorithm. The torque output follows the arm different
operating angle at constant speed, no shaking, keep fast and steady. Super-fast response time algorithm, the motor
can complete the precise limit of 90 degree lifting and closing with 15 milliseconds at the speed of 3000 RPM. Special
hf power supply, arm can be opened automatically when power off, is general global voltage standard,AC90V
50/60Hz-AC264V 50/60Hz no municipal electricity place can be connected with DC24V battery for more than 8000 times.
The battery can be connected with solar and wind power.
İlgili kişi: Keira
Tel: +86 185 0748 1610
Faks: 86-0755-84536531
